Refco Gobi II User Manual

Instruction manual Gobi II English
3
DO NOT use tools to connect the tubing.
DO NOT operate this product in ambient temperatures below
5 °C (41 °F).
DO NOT operate with incoming water above a temperature of
40 °C (104 °F).
CAUTION: Do not allow any chemicals to come in contact with
this condensate pump. Please remove the pump and water sensor
before using any coil cleaning solutions and other chemicals. Flush
the evaporator coils with water before reinstalling the condensate
pump and water sensor.
Technical data
Maximum fl ow rate: 42 l/Hr. (11 GPH)
Maximum suction: 3 m (9.80 ft.) self priming
Maximum head: 20 m (65.60 ft.)
Maximum horizontal run: 100 m (330 ft.) at 0 head and 0 suction
Sound: 19dBA at 1 m DIN EN ISO 3741:2011 / DIN EN ISO 3744:2010
Voltage: 100 ~ 240 VAC 50/60 Hz auto sensing universal power input
Power: 8 W during maximum operation at 110 V
Alarm relay: 10 Amps contacts with integrated replaceable 10A fuse 5 × 20 mm
Weight: 1‘100 g (2.45 lb.)
Discharge star tube: 6.25 mm I.D. (1/4“) × 1 m (3.3 ft.)
Packaging dimensions: 250 x 340 x 54 mm (9.9 x 13.4 x 2.1 inches)
Bulk pack dimensions: 10 Pcs dimensions are 590 x 265 x 365 mm (23.2 x 10.4 x 14.4 inches)
Color: RAL #9003 white
Protection: Fully potted, IP-44
Operation temp:
Ambient 5°C to 40°C (41°F to 104°F) / Water 5°C to 40°C (41°F to 104°F)
Compliance:
Capacity
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44
0 1 2 3 4 5 6 7 8 9 10
Capacity l/Hr
Capacity US G/Hr
Vertical lift / head pressure m
20
18
16
14
12
10
8
6
4
2
0
Gobi II & Combi at full power
60
50
40
30
20
10
0
Vertical lift / head pressure ft.
Ensure the evaporator coils are free of chemicals before reinstalla-
tion of the REFCO Gobi II pump.
CAUTION: This appliance incorporates an earth connection for
functional purposes only.

Refco Gobi II Specifications

General

Brand	Refco
Model	Gobi II
Category	Water Pump
Language	English