REFLEX ACTIVE 05 Series - User Manual

• To switch on the watch, press and hold the side button until the display is on.
• To switch off the watch, press the touch key repeatedly until ‘more’ icon shows on the display and then long press
to enter in ‘Power off’, long press the touch key again.
• You can press the touch key, or turn on gesture control in advanced settings of REFLEX ACTIVE App. and raise your
hand to illuminate the screen.
HOW TO CHARGE
OPERATION INTRODUCTION
1. Open the charger case and place the watch head into the case.
2. Connect the metal pins of the USB cable with the metal point on the back of the bracelet until the charging icon
appears on the screen.
3. Close the case and plug the USB into the port or plug.
4. Once power charger is plugged in, the watch will activate automatically.
5. Please charge the band when it displays low battery.
6. A 2 hour charge time is sufficient to fully charge your smartwatch, please ensure you do not exceed a 2 hour
charge period.
Please take a few minutes to read through these instructions,
they will help ensure you get the best from your smartwatch. You
can also visit our website or scan this QR code for lots of helpful
information and video guides. And of course, if you have any
questions, please get in touch, we’re here to help!
series 05 - getting started
To download our app, search for REFLEX ACTIVE App .
or scan the appropriate QR code for installation. Use
your smart phone camera or QR code reader app.
COMPATIBILITY
CONNECTING BAND TO MOBILE PHONE
1. Enable Bluetooth on your smart phone.
2. Open the REFLEX ACTIVE App. on your smart phone.
3. Review and accept privacy policy.
4. Set your profile following the steps presented.
5. Set your goals following the steps presented.
6. To connect your watch, tap the green icon & select your watch from the list.
7. Tap OK to allow notifications to appear on your smartwatch.
Visit our SUPPORT section to view our video guide.
DISCONNECTING YOUR SMART WATCH & PHONE
1. Open the REFLEX ACTIVE
App . on your smart phone.
2. Tap disconnect device in Settings.
3. Forget your device on your smart phones Bluetooth settings.
DOWNLOADING THE REFLEX ACTIVE App.
The REFLEX ACTIVE app will work on the following smartphones:
• Android (version 4.4 and above)
• Apple IOS (version 8.0 and above)
Please ensure the app is the latest version and has Bluetooth 5.0
www.reflex-active.com/pages/support
+44 (0)121 524 1400
support@reflex-active.co.uk
Please note: Your REFLEX ACTIVE tracker will reset every day at midnight. Data is stored on the tracker for 7 days. For best results, ensuring activities and a full history are recorded, we recommend you sync your tracker to the App. daily.
TIME SCREEN There are 3 different time screens to select from, press the touch key to
select the one you prefer.
CAMERA CONTROL Once connected to the App., the photo feature will be accessible via
settings. By selecting ‘take photo’, you can take an image on your camera phone by pressing
the touch key on your watch. The photo will automatically save onto your phone gallery for
Android devices, or the option to save/retake on IOS devices.
ACTIVITY TRACKING Press the touch key repeatedly until Sports icon is displayed & long
press the touch key to enter in the multi-sport mode. The smart watch has 4 sports modes:
Walking, Running, Cycling and Hiking. Long press touch key to select and then enjoy your
sport. The smart watch will record your data. After your sports, you can long press the
touch key twice to stop recording and save the sports data. You can also check your sports
data in the app.
Note: If your exercise time is less than 5 minutes, the data will not be saved.
Running
Walking
History
CALL ALERTS After successfully connecting with the REFLEX ACTIVE app, turn on
‘Notifications’ in Settings, and you will receive call notifications on your smartwatch.
ACTIVITY REMINDER Turn on the sedentary reminder you’ve set in the REFLEX ACTIVE app.
Your watch will vibrate to remind you to take a little excercise.
DAILY ACTIVITIES The smartwatch will record your daily activity automatically. Press the
touch key to check pedometer, distance and calories. After syncing with the REFLEX ACTIVE
app, these sports data can be also checked within the app.
1600
2305
1.8
Steps
MESSAGES Unread messages will be displayed in ‘Message’ interface. Press the touch key
to enter and read the messages on the watch.
SLEEP Wear the watch to fall asleep during 9:00 p.m. to 9:00 a.m.; the watch can record
your sleep data of last night on the next day. Press the side button to check the sleep data.
WEATHER After connecting with the REFLEX ACTIVE App, you can select city in advanced
settings of the app. and the weather of this city will be displayed on your smartwatch.
C
C
FIND YOUR PHONE OR SMARTWATCH Once the smart watch is connected to the App.,
the find phone feature will be available. Access via sub menu and then more. Press the
touch key to open the ‘Find the phone', then double tap the touch key and your phone will
sound a locator alarm. To find your smartwatch from your phone, select find device from
settings menu.
Find phone
MORE Press the touch key repeatedly until MORE icon shows on the display and long press
the touch key to access ‘Power off’, ‘About’, ‘Find Phone’ and ‘Reset’.
RESET Long press the touch key, your watch will be reset and restart.
Reset
POWER OFF Long press the touch key to turn off the watch.
Long press
to turn off
HEARTRATE view your current heart rate, and average walking, running, hiking and cycling
rate. Your watch will continue to detect your heart rate as long as you wear it even when you
sleep! Use the touch button until you select the Heart Rate icon. Hold the touch button
until the icon changes to BPM. It will detect the current heart rate. If you want the feature
to be active on selective times, then you select this by opening REFLEX ACTIVE App,
selecting ‘Settings’ and ‘Advance Settings’. Select Heart rate and set the tone you wish the
feature to be active.
Heart Rate
MUSIC CONTROL Open your phone’s default music APP, long touch for entering in BT music,
then click in this interface for controlling music: Play/Stop/Next song/Last song.
07 02
GETTING TO KNOW THE SCREENS

Summary

Getting Started and App Setup

Downloading the Reflex Active App

Instructions for downloading and installing the REFLEX ACTIVE App from app stores.

Connecting Band to Mobile Phone

Steps to enable Bluetooth, open the app, and pair your smartwatch with your smartphone.

Disconnecting Your Smart Watch & Phone

Guide on how to disconnect the smartwatch from the REFLEX ACTIVE app and phone settings.

Watch Operation and Features

How to Charge Your Smartwatch

Detailed instructions on how to charge the smartwatch using the provided cable.

Operation Introduction

How to switch the watch on/off and use the touch key for navigation and screen illumination.

Understanding Watch Screens

Overview of different screens like Time, Heart Rate, Activity Tracking, Sleep, Messages, Weather.

Music Control and Daily Activities

Control music playback and track daily steps, distance, and calories.

Notifications and Camera Control

Receive call/message notifications and use the watch to control your phone's camera.

More Features: Power Off and Find Phone

Access power off, find phone, and reset options from the 'More' menu.

Specifications and Care Instructions

Product Specifications

Technical details of the smartwatch including RAM, ROM, battery, and water resistance.

Smartwatch Care and Maintenance

Guidelines for caring for the watch strap, silicone strap, and general watch maintenance.

Step Counter Accuracy Explanation

Explanation of how the step counter works and potential inaccuracies due to wrist movement.

Support, Safety, and Compliance

Guarantee and Contact Information

Details about the product guarantee, how to contact customer support, and warranty exclusions.

Important Safety Information

Crucial safety warnings regarding battery, device usage, health, and potential interference.

Disposal of Goods and Compliance

Instructions for proper disposal of the smartwatch and its batteries according to regulations.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The REFLEX ACTIVE Series 05 is a smartwatch designed to track various activities, monitor health metrics, and provide smartphone notifications. It features a 1.3-inch TFT one-touch LCD screen and connects to smartphones via Bluetooth 5.0.

Function Description

The smartwatch offers multiple functions accessible through its display and the REFLEX ACTIVE app.

Time Screen: Users can select from three different time display screens by pressing the touch key.

Heart Rate Monitoring: The device continuously monitors heart rate, even during sleep. To view the current heart rate, users navigate to the Heart Rate icon and long-press the touch button until it displays BPM. Selective heart rate monitoring can be activated through the REFLEX ACTIVE app's settings.

Activity Tracking: The smartwatch includes four multi-sport modes: Walking, Running, Cycling, and Hiking. Users can select a mode by long-pressing the touch key on the Sports icon. The device records data for the chosen activity. To stop recording and save data, the touch key must be long-pressed twice. Activity data can also be viewed in the app. Note that data for exercises less than 5 minutes will not be saved.

Daily Activities: The smartwatch automatically records daily activity, including pedometer steps, distance, and calories. This data can be checked on the watch and synced with the REFLEX ACTIVE app for a full history.

Sleep Tracking: When worn during sleep (9:00 p.m. to 9:00 a.m.), the watch records sleep data, which can be viewed the next day by pressing the side button.

Messages: Unread messages are displayed in the 'Message' interface. Users can press the touch key to enter and read messages on the watch.

Weather: After connecting to the REFLEX ACTIVE app, users can select a city in the app's advanced settings to display the local weather on their smartwatch.

Activity Reminder: The sedentary reminder, set in the REFLEX ACTIVE app, causes the watch to vibrate, prompting users to take a short break or exercise.

Music Control: When connected to the phone, users can control their phone's default music app (Play/Stop, Next song, Last song) by long-pressing the touch key on the BT music interface.

Call Alerts: Once successfully connected to the REFLEX ACTIVE app and with 'Notifications' turned on in settings, the smartwatch will display call notifications.

Camera Control: The smartwatch can act as a remote shutter for the phone's camera. After connecting to the app, users can access the photo feature via settings. Pressing the touch key on the watch takes a picture. For Android devices, photos are saved automatically to the phone gallery; for iOS devices, users have the option to save or retake.

Find Phone/Smartwatch: If the smartwatch is connected to the app, the 'Find Phone' feature is available via the 'More' sub-menu. Pressing the touch key to open 'Find the phone' and then double-tapping the touch key will make the phone sound an alarm. To find the smartwatch from the phone, users select 'find device' from the app's settings menu.

Power Off: Long-pressing the touch key turns off the watch.

Reset: Long-pressing the touch key resets and restarts the watch.

Important Technical Specifications

• RAM/ROM: 32k/512k
• LCD Screen Size: 1.3" TFT One touch
• Bluetooth: BT5.0
• Battery: Built-in rechargeable lithium battery
• Battery Capacity: 155mAH
• Standby Time: Up to 15 days
• Charge Time: 2 hours
• Water Resistant: IP67*
• Heart Rate: YES
• Operating Frequency: 2402-2480 Mhz
• Compatibility: Android (version 4.4 and above), Apple iOS (version 8.0 and above). Requires Bluetooth 5.0.

Usage Features

Charging:

1. Open the charger case and place the watch head inside.
2. Connect the metal pins of the USB cable to the metal point on the back of the bracelet until the charging icon appears.
3. Close the case and plug the USB into a port or plug.
4. The watch activates automatically once plugged in.
5. Charge when the battery is low.
6. A 2-hour charge is sufficient for a full charge; do not exceed this period.

Operation Introduction:

• Switch On: Press and hold the side button until the display turns on.
• Switch Off: Repeatedly press the touch key until the 'more' icon appears, then long-press to enter 'Power off', and long-press the touch key again.
• Screen Illumination: Press the touch key, or enable gesture control in the REFLEX ACTIVE app's advanced settings and raise your hand.

App Connection:

1. Enable Bluetooth on your smartphone.
2. Open the REFLEX ACTIVE App.
3. Review and accept the privacy policy.
4. Set up your profile and goals.
5. Tap the green icon and select your watch from the list to connect.
6. Tap OK to allow notifications on the smartwatch.

Disconnecting:

1. Open the REFLEX ACTIVE App.
2. Tap 'disconnect device' in Settings.
3. Forget the device in your smartphone's Bluetooth settings.

Maintenance Features

Smartwatch Care:

• Avoid contact with sprays, creams, corrosive agents (paint, solvents, adhesives), direct heat, or sunlight.
• Keep the watch dry; it is not suitable for swimming or showers and should not be immersed in water.
• Do not attempt to replace or disassemble the battery.

Strap Care:

• Treat with care and limit exposure to direct heat or sunlight.
• Keep the watch dry and away from wet surfaces.
• Do not use chemical cleaners; avoid contact with cosmetic products like fake tan or perfumes.
• Light soiling can be cleaned with a weak soapy water solution on a barely damp, soft cloth.
• Be aware that light-coloured straps can attract colour transfer from other materials and cosmetic substances.

Silicone Strap Care:

• Clean regularly with mild soap and water to remove dirt, oils, lotions, etc., ensuring the smartwatch case does not get wet.
• Store in the gift box when not wearing it.

Step Counter Accuracy:

• The smartwatch uses multiaxis inertial sensors (accelerometers) to detect wrist movement and measure steps.
• Some wrist actions while standing or sitting can mimic arm movement, potentially leading to falsely recorded steps.
• The step count should be used as a guide only.

Data Storage:

• The REFLEX ACTIVE tracker resets every day at midnight.
• Data is stored on the tracker for 7 days.
• For best results and a full history, sync the tracker to the app daily.

Safety Information:

• Do not attempt to replace the battery, open the device enclosure, or disassemble the product.
• Substances within the battery may harm the environment or cause injury if handled improperly.
• In case of contact with battery acid, flush the affected area with clean water and seek immediate medical attention.
• Ensure the smartwatch correctly engages with the charging contacts.
• Check for damage before each use; do not use if damaged.
• This is not a toy; children should not play with it.
• Protect from strong impacts, vibrations, direct sunlight, dirt, heavy objects, pressure, and strong magnetic fields.
• Salt and thermal water can corrode metal parts. Remove before using saunas.
• Do not operate near heat sources or cover during operation/charging.
• Do not use on aeroplanes, in hospitals, service rooms, or near medical electronic systems, as wireless signals could impact sensitive electronics.
• Do not use if the display is cracked or if exposed to extreme high or low temperatures.
• Do not use abrasive cleaners.
• Remove immediately if it feels warm or hot.
• Do not charge if wet.
• Do not check notifications or other applications while driving.
• Be aware of surroundings when using the product.
• Remove at regular intervals for gentle cleaning.

Health Warnings:

• Smartwatches contain components that emit electromagnetic fields, and some models with magnetic charging docks contain magnets. These may interfere with medical devices like pacemakers and implanted defibrillators. Consult your doctor and device manufacturer if you use any medical device.
• The heart rate monitor is for recreational use only, not for medical diagnosis or monitoring.
• The heart rate monitor periodically emits flashing lights; consult your doctor if you have epilepsy or similar conditions.
• The heart rate monitor provides an estimate, but readings can be affected by fit, wearer characteristics, and activity intensity.
• The smartwatch helps calculate distances and calories burned; consult a doctor before starting new exercise regimes.
• Sensors track movement to estimate activity, sleep, and calories, but these estimations are not always fully accurate.
• Some wearers may experience skin irritation if worn for prolonged periods, especially those with sensitive skin or allergies. Remove the smartwatch if irritation occurs.
• To prevent irritation, remove regularly for cleaning and do not over-tighten on the wrist. Remove each day for gentle cleaning.

Disposal:

• The crossed-out wheelie bin symbol indicates that waste electrical products, batteries, and accumulators should not be disposed of in household waste.
• If unable to reuse or recycle, dispose of at a civic amenity site or local authority recycling facility.
• Dispose of packaging and product according to local regulations.
• Batteries require separate collection.

REFLEX ACTIVE 05 Series Specifications

General

Brand	REFLEX ACTIVE
Model	05 Series
Category	Watch
Language	English