28
The default password is: 1369
1. OLD PASSWORD:
Enter the old password.
2. NEW PASSWORD:
Enter the new 4-digit password using the number keys on the remote control.
3. CONFIRM PASSWORD:
Enter the new password again. If the entries match, the entry jumps to OK.
4. OK:
Now press the ENTER button on the remote control to confirm.
Note:
If you change the password, the password mode is also changed. The preset
password 1369 always works, even if the password has been changed.
SETTING MENU- SECOND MONITOR
Picture settings
Brightness:
Adjust the screen brightness.
Contrast:
Adjust the screen contrast.
Colour:
Adjust the screen colour setting.
Language:
Selecting the display language.
Aspect Ratio:
Setting the screen to 16:9 or 4:3.
Screen:
Set screen aspect ratio to 16:9 or 4:3.
To Next Page
Loading...
