REFU REFUsol 13K - Sending Config; Portal Test Function

REFU Elektronik GmbH REFUsol 08K ... 23K 45
6.8 Sending Config
Menu Configuration > Portal monitoring > Config sending
The configuration data is required by REFUlog in order to recognise the inverter. If you want to send it
manually, select the menu and set the parameter to 1. If the sending was successful, the parameter will be
set back to 0 automatically.
6.9 Portal Test Function
Menu Configuration > Portal monitoring > Portal Test
On request of our service, you can send a test data package to the portal. Open the menu and select „yes“.