Rega AETHOS User Manual

1 ...............................................................................................................Introduction
2 ...............................................................................Installation and ventilation
2-3 ................................................................................ Rear panel connectivity
2-3 ...................................................................................... Front panel controls
4 .......................................................... Thermal cut-out and DC protection
4 ......................... Operating temperature and short circuit protection
4 .....................................................................................................Remote control
5-7 ....................................................................................................Specications
7-9 ........................................................................................Safety and warranty
1
AETHOS
Introduction
The Aethos stereo amplier is housed in a brand new
custom designed case. Employing four 160 W 16 Amp output
transistors per channel, this delivers 125 W per channel into
8 Ω. The Aethos is a dual mono design using a custom wound
toroidal transformer and regulated supplies for the sensitive
amplication and driver stages. The pre-amplier stage uses
class-A discrete circuitry throughout. The Aethos is a no
compromise product with one goal, to deliver your music as
faithfully as possible.
World class hi- made in England. | www.rega.co.uk

Rega AETHOS Specifications

General

Type	Integrated Amplifier
Weight	17.5 kg
Power Output	125 W per channel into 8 Ω
Outputs	1 x Record Out (RCA), 1 x Preamp Out (RCA)
Dimensions	432 mm (W) x 360 mm (D) x 120 mm (H)
Input Impedance	47 kΩ
Signal to Noise Ratio	> 105 dB
Inputs	5 x Line Level Inputs (RCA)
THD+N	< 0.007%