4
CONNECTIVITY
All the line level inputs and the line level output are made via RCA (Phono)
connectors. The sockets on Rega amplifiers are identified as follows:
Left: Always the upper row and marked in WHITE
Right: Always the lower row and marked in RED
IMPORTANT: ALWAYS TURN OFF THE AMPLIFIER WHEN CHANGING
LEADS & SPEAKER CABLES.
Rear Panel Connections
Input 1 – Phono stage for use with a turntable only.
The Phono input can be used with moving magnet (MM) or HIGH OUTPUT moving coil
(MC) cartridges.
To Next Page
Loading...
