5
Introduction
breaking features, materials and technology developed by Rega over many years to
deliver the ultimate in vinyl replay.
This ultra rigid structure is then strengthened further using ceramic aluminium oxide
braces, the same material used to create the redesigned, resonance controlled ceramic
ultimate control over speed and vibration. The motor drive is transferred via three
Reference EBLT drive belts which rotate a custom aluminium sub-platter with a spindle
The RB Titanium tonearm is the most advanced and accurate production tonearm we
have every released. The entire tonearm structure is designed to have the minimum
of mechanical joints whilst using the stiffest materials in all critical areas. The RB-
Titanium achieves near frictionless movement horizontally and vertically whilst
having no measurable free play in the bearing assemblies. The RB-Titanium uses a
new one-piece titanium vertical bearing and titanium vertical spindle assembly. The
polished aluminium single piece arm tube to keep mass as low as possible. The design
is completed with a Tungsten balance weight shaft and balance weight.
We hope you enjoy this very special turntable as much as we enjoyed creating it.
English
Click to return to top
To Next Page
Loading...
