Need help?Do you have a question about the Rega Planar 1 Plus and is the answer not in the manual?
General| Drive Type | Belt Drive |
|---|---|
| Built-in Phono Stage | Yes |
| Platter Material | Phenolic Resin |
| Tonearm | Rega RB110 |
| Cartridge | Rega Carbon |
| Speed | 33 1/3, 45 RPM |
| Output | RCA |
| Motor | 24V Synchronous |
| Power Supply | Mains powered |
Details the high-specification pre-amplifier designed to amplify cartridge signals for line level inputs.
Advises on connecting 3.5mm to phono leads and avoiding integrated phono stages.
Emphasizes using only the supplied Rega PS1 350 mA mains adaptors for safety.
Recommends placing the turntable on a firm, level surface away from loudspeakers.
Instructs to plug in the Rega PS1 350 mA power supply to complete the setup.
Covers avoiding liquids, heat sources, ensuring ventilation, and moderate climates.
Advises on keeping small parts away from children and unplugging during extended periods of non-use.
Details maximum output level, impedance, and frequency response of the pre-amplifier.
Specifies RIAA accuracy and pre-amplifier gain levels.
Lists the power requirements for 50 Hz and 60 Hz operation.
Provides guidance on cleaning and seeking professional service if issues arise.
Outlines the lifetime warranty against manufacturing defects and conditions for validity.
To Next Page
