Need help?Do you have a question about the Rega P10 and is the answer not in the manual?
General| Drive System | Belt Drive |
|---|---|
| Tonearm | Rega RB3000 |
| Speed Control | Electronic Speed Change |
| Motor | 24V Low noise |
| Power Supply | PSU |
| Speed | 33.3 rpm, 45 rpm |
| Signal to Noise Ratio | 80dB |
| Cartridge | Not Included |
| Dimensions | 125 mm |
| Weight | 4.7 kg |
| Finish | White |
| Platter | Ceramic, with super flywheel effect |
Connect the PSU, turntable, and amplifier, ensuring proper cable routing to minimize hum.
Details on correctly mounting the cartridge and setting tracking force and bias.
Operation of the P10 PSU, including speed adjustment and factory reset.
Using the Rega Strobe kit and a stroboscopic disc to accurately set turntable speed.
Lists electrical specifications for the Rega Planar 10 across different voltage regions.
Guidance on cleaning, maintenance, and the product's warranty terms.
Essential safety precautions for operating the turntable and PSU.
To Next Page
