7
Setup and connections (make all connections before powering up)
pick up by the cartridge, the power supply should be situated as far from the turntable as the interconnect cable will allow.
Connecting to the amplier
The tonearm external phono leads must be connected to a suitable phono stage. Depending on the type of cartridge you have chosen, you will
Cartridge mounting and setting up the RB-TITANIUM tonearm
Note: When using any Rega cartridge featuring a three-point mounting system, overhang is automatically set.
With the cartridge correctly mounted and with the stylus guard removed, ensure that the tracking force dial (A) and bias adjustment (B) are set to
zero. Adjust the balance weight (C)
Note: It is normal for the arm to swing back towards the arm clip position even with the bias set at zero. Therefore, it is advisable to gently hold the
doubt, it is advisable to use a tracking force that corresponds with the upper limits of the cartridge manufacturer’s range.
Note:
cartridges.
will be able to carry out the work for you. Thank you for purchasing this Rega product and we wish you many hours of musical enjoyment.
English
Click to return to top
To Next Page
Loading...
