Please follow this quick set up guide to ensure
optimum performance and perfect operation.
Failure to do so may invalidate your warranty.
For more information on this product please visit
www.rega.co.uk
Unpacking and setting up the Planar 3
quick start guide
planar three
Platter
2
Drive belt & pulley
3
Tonearm
5
Plinth
6
Power input
7
Phono output
8
Finger lift
9
On/Off switch
(underneath plinth)
4
Balance weight
Thank you for purchasing this Rega
product.
The Rega
turntable wall
bracket is the
ideal solution.
*
*
Always keep the turntable flat.
Follow the unpacking guide printed inside the front of
the box.
Save the packaging in case you need to transport your
turntable in the future.
Place the turntable on a rigid level surface.
Ensure the drive belt is in place and remove the
transport hub card from beneath the sub platter.
Carefully place the glass platter on the hub and fit the
turntable mat.
9
3
8
5
2
6
7
4
Only use a microfibre cloth to clean the plinth and lid.
To Next Page
Need help?
General
