Rega turntables are designed to optimise performance for music repro-
duction and therefore no compromises have been made to give quick
start times. The normal time taken for full speed to be reached is
between 2-5 seconds. Carefully spinning the platter clockwise as you
switch the motor on, gives a quicker start up time and will prolong the
life of the belt and the motor.
The arm earth (or ground) is automatically connected through the arm cable
screening. No other earthing should be necessary.
Save the original packing in case you ever need to transport the
turntable.
Don’t use any polishes on the turntable or lid. To clean or dust,
wipe gently with a soft cotton duster (slightly damp only if nec-
essary).
S h o u l d
y o u
e x p e r i e n c e
a n y
p r o b l e m
w i t h
y o u r
t u r n t a b l e
o r
w i s h
t o
e n q u i r e
a b o u t
s e r v i c i n g
p l e a s e
c o n t a c t
y o u r
R e g a
d e a l e r .
6
7
9
10
8
4
To Next Page
Loading...
