USB SETUP & CONNECTIVITY
Connect a USB A-B type lead (as illustrated) from the DAC USB to a USB output on
your PC. IMPORTANT : Before you can use the USB function of the Saturn–R you
must first download the Rega USB Windows driver and install it on your PC. This
driver is available for download from the Rega website, www.rega.co.uk, then go
to products, CD Players then Saturn–R. Follow the instruction for installation.
Once installed, USB will be ready to use. The driver is not required for MAC OS.
It is recommended to switch off any other system sounds emitted by the PC via the
control panel. In some systems the DAC will automatically become the default for
your PC whilst connected. Once disconnected, the previous default should be
restored. If this does not happen you can manually reset as follows:
Windows XP
-
Control Panel/Sounds and Audio Devices/Audio/Sound Playback.
Windows Vista / Windows 7- Control Panel/Hardware and Sound/Manage Audio
Devices/select ‘Saturn-R’ from list. Mac OS - System Preferences/Sound Output/
Select ‘Saturn-R’.
USB A - B lead (not supplied)
5
To Next Page
Loading...
Need help?
General
