EasyManuals Logo

Regal LS4C User Manual

Default Icon
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Vessel Cruise Checklist
Obtain a current weather update.
Hoist the boat & periodically inspect the hull bottom and propellers for damage. Ma-
rine growth such as barnacles will affect performance and fuel efficiency. Check sac-
rificial anodes located on the propulsion unit, transom and engine. Replace anode if
less than 2/3 remaining.
Check the electrical system and all safety related equipment. Carry extra fuses. En-
sure they are of the proper capacity and type.
If your boat has been in the water, run the bilge pump until the flow of water stops.
Check to see that all bilge water has drained and the drain plug is installed before
launching If your boat if it has been out of the water.
Check that all required safety equipment is on board and in good working condition
Examples include personal flotation devices (PFD’s), horn, bell, hand held fire extin-
guishers, and visual distress signals.
Check fuel level. Fuel tanks should be filled to slightly less than capacity. Allow for fuel
expansion. Remember the “one third rule”.
Open engine compartment. Inspect for fuel odors and visible leaks in the fuel, oil, cool-
ant, exhaust and power steering systems.
Check all fuel filters for the presence of water.
Check fluid levels of engines, drives and generator (if applicable).
Inspect engine for cracked hoses, worn or loose belts, and loose hardware.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Regal LS4C and is the answer not in the manual?

Regal LS4C Specifications

General IconGeneral
BrandRegal
ModelLS4C
CategoryBoat
LanguageEnglish

Related product manuals