146
Seat- Aft Bench/Sun Lounge
The aft bench seats feature
multi-function capability.
They can be converted to a
sun lounge position and the aft
seat fillers can be positioned
to face aft.
From the normal sitting
position facing forward the
seats can be converted to a
sun lounge.
To convert find the seat latch
on the vertical surface of the
desired seat. Press the latch
and while pulling back on the
seat itself. It will tilt back to a
partial lounge position. When
latch is activated again and
held down the seat will push
down into a full tilt aft facing
lounge. Note that these sun lounge aft facing positions
are not to be occupied when the vessel is underway.
SUN LOUNGE-
FULL TILT AFT
To convert the seat to a
sitting position aft pull up
on the aft seat cushion.
On the forward side of
the cushion is a backrest
support panel.
The panel holds the
backrest in a pre-set
position. Raise the panel
until the it latches in
the pre-fitted backrest
grooves.
Note that the port and starboard aft starboard cushions
lift for accessibility to storage or equipment.
The starboard aft cushion offers access to selected
direct current components including the battery
switch. When leaving the vessel it is recommended
that the battery switch be turned to the “off” position.
The automatic bilge pump and stereo memory
circuits will still function with the battery switch
deactivated.
To Next Page
Loading...
