English8
Installing Your Bed Rail
NOTE: The following steps may require the help of an additional person.
NOTE: You may need to release
the strap locking buckles located
on the under side of the plastic
hinges. Ensure that the large end
of the anchor is pointing up. The
anchoring straps should not be
twisted. If twisted, the anchoring
straps will not tighten properly.
STEP 1
Start by placing the bed rail on the side of the bed you have chosen for
installation. The left and right swing lock and strap assemblies should be
placed on top of the box spring that will support the mattress. The ‘T’ shaped
anchors and straps should be extended opposite the bed rail and mounted to
the outer edge of the box spring or mattress support structure.
To Next Page
Loading...
