City Series CV50E Direct Vent Gas Fireplace | 1
City Series CV50E Direct Vent Gas Fireplace
MODEL CV50E-NG CV50E-LP
Fuel Type Natural Gas Propane
Minimum Supply Pressure 5” W.C. (1.25 kPa) 11” W.C. (2.73 kPa)
Manifold Pressure - High 3.8” W.C. (0.94 kPa) 10.5” W.C. (2.62 kPa)
Manifold Pressure - Low 1.1” W.C. (0.27 kPa) 2.9” W.C. (0.72 kPa)
Orice Size -Altitude 0-4500 ft # 36 DMS # 52 DMS
Minimum Input
Altitude 0-4500 ft. (0-1372m)
19,000 Btu/h
(5.56 kW)
17,000 Btu/h
(4.98 kW)
Maximum Input
Altitude 0-4500 ft. (0-1372m)
35,000 Btu/h
(10.25 kW)
33,000 Btu/h
(9.66 kW)
Vent Sizing 5” Inner / 8” Outer 5” Inner / 8” Outer
CSA P.4.1. 57.49% 60.55%
Dimensions
Note: Height Dimension is taken with leveling legs fully inserted and may vary depending on the height of the leveling legs, when unscrewed or extended.
Dimensions will appear as (inches)" / (metric) mm throughout this manual. The inches are rounded to the nearest 1/16" when converted, when greater
accuracy is required, use the metric dimensions.
Note: These units are non-load bearing.
ALL PICTURES / DIAGRAMS SHOWN THROUGHOUT THIS MANUAL ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCT MAY
VARY DUE TO PRODUCT ENHANCEMENTS.
18"
457mm
10
3
16
"
258mm
13
3
8
"
340mm
54
3
8
"
1382mm
37"
940mm
20
15
16
"
532mm
11
7
8
"
301mm
9
1
8
"
231mm
49
3
16
"
1249mm
8"
203mm
5"
127mm
8
1
2
"
216mm
45
7
8
"
1165mm
20-7/16''
(519 mm)
NOTE: This model comes with a 5” inner and 8” outer collar (127 mm x 203 mm) which must be reduced to 4” inner x 6-5/8” outer
(102 mm x 168 mm) in all applications when used as a power vent system. See power vent manual for details.
To Next Page
Need help?
General
