Need help?Do you have a question about the Regin OPTIGO OP10 and is the answer not in the manual?
Lists the five pre-programmed control modes available for the Optigo OP10 controller.
Covers essential technical parameters like supply voltage, consumption, ambient conditions, and dimensions.
Lists the specifications for the controller's analogue and digital inputs, including sensor types and ranges.
Details the specifications for the controller's analogue and digital outputs, including voltage and current ratings.
Details the specific supply voltage requirements (24V AC) and transformer connection considerations.
Provides detailed descriptions of each input and output terminal function and connection requirements.
Explains supply air temperature control where the setpoint is adjusted based on outdoor temperature.
Details cascade control for room/exhaust air, using PI and P loops for setpoint adjustment.
Explains the configuration of the universal input for electric heating limit switches or frost protection sensors.
Explains how the supply air setpoint is displaced based on outdoor temperature in control mode 2.
Describes the alarm indicator on the display and potential activation of DO1 as an alarm output.
Details the four distinct alarm types: Frost protection, High temperature limit, Fan indication, and Sensor error.
Explains the general function of the scheduler, its points, and how it operates for different control modes.
Guides on selecting one of the five available control modes using the configuration menus.
Explains how to choose between analogue 0-10V output or 3-point digital output for actuators.
Covers damper minimum position, cascade factor, 0° boost, and D-factor for various control modes.
Details UI1 input configurations, pump exercise, and overheating functions for specific control modes.
Provides the procedure for resetting the OP10 controller to its original factory default settings.
Lists the five pre-programmed control modes available for the Optigo OP10 controller.
Covers essential technical parameters like supply voltage, consumption, ambient conditions, and dimensions.
Lists the specifications for the controller's analogue and digital inputs, including sensor types and ranges.
Details the specifications for the controller's analogue and digital outputs, including voltage and current ratings.
Details the specific supply voltage requirements (24V AC) and transformer connection considerations.
Provides detailed descriptions of each input and output terminal function and connection requirements.
Explains supply air temperature control where the setpoint is adjusted based on outdoor temperature.
Details cascade control for room/exhaust air, using PI and P loops for setpoint adjustment.
Explains the configuration of the universal input for electric heating limit switches or frost protection sensors.
Explains how the supply air setpoint is displaced based on outdoor temperature in control mode 2.
Describes the alarm indicator on the display and potential activation of DO1 as an alarm output.
Details the four distinct alarm types: Frost protection, High temperature limit, Fan indication, and Sensor error.
Explains the general function of the scheduler, its points, and how it operates for different control modes.
Guides on selecting one of the five available control modes using the configuration menus.
Explains how to choose between analogue 0-10V output or 3-point digital output for actuators.
Covers damper minimum position, cascade factor, 0° boost, and D-factor for various control modes.
Details UI1 input configurations, pump exercise, and overheating functions for specific control modes.
Provides the procedure for resetting the OP10 controller to its original factory default settings.
General| Brand | Regin |
|---|---|
| Model | OPTIGO OP10 |
| Category | Network Router |
| Language | English |
To Next Page
