Fixing
R eminder
The assemly must be secured from any water spray and in a properly
ventilated room.
The box has a dimension of 255 x 180 mm.
In order to maintain the performance and reliability of he assembly, provide the necessary space
between it and the nearest devices and obstacles.
The Bulleur is supplied with a mounting template to facilitate the installation- 4 fixing holes make
it possible to assemble the assembly.
Mark the location of the holes , using a level, 6 mm holes for the provided pegs.
1- Installating the device
2x stainless screws 4x35mm
Accessories required for wall mounting are supplied
2x anchors diam.6mm
Whenever possible, use the materials
provided, they have been chosen for
their qualities.
-stainless steel screws for better
moisture resistance.
8
Gauge plate of the devices Régul’
Location of the holes for the Bulleur
To Next Page
Loading...