calibration of the levels
Calibration of zéro and the thresholds
Put measuring rod
out of water
Calibration
flashes
Set the desired
adjustable level from 0
to the selected level
Security level
clic
Level S
Low safety threshold
filtration and filling
0 x cm
Calibration of Zéro
14
clic 2"
After taking out the
measuring rod out of water
adjust the display to 0.00
N1
S
Calibration
clic
Compressor ON
-
+
-0.99 à 0.99
switching to safety
threshold setting
compressor stop
Calibration
flashes
clic 2"
clic
Level N1
Filling threshold
authorization of filtration
S x cm
N1
S
Calibration
flashes
clic 2"
Level 1 filling
set the desired level,
it is adjustable from
the previous level
to the chosen level
clic
Level N2
SThreshold stop filling
(stop drain)
N1 x cm
N1
S
Calibration
flashes
clic 2"
N2 stop filling
Set the desired level,
it is adjustable from
the previous level
to the chosen level
Calibration
Calibration Calibration
clic
Level N3
Threshold force filtration
N2 x cm
N1
S
Calibration
flashes
clic 2"
N3 force filtration
Set the desired level,
it is adjustable from
the previous level to
the chosen level
clic
Level drain
Emptying level
N3 x cm
N1
S
Calibration
clic 2"
Set the desired level ,
it is adjustable from
the previous level to
the chosen level
OPTION
Calibration
Exit
the menu
of calibration
flashes
Calibration
At any time a « 2 seconds « click allows to adjust one or more levels, the calibration message
is displayed and then flashes after a second long « 2 seconds »click, if the value needs to be
changed.
clic 2"
a long clic allows by click on
the button to enter in the
menu.
aand by a second click of 2"
to modifiy a data.
To Next Page
Loading...
Need help?
General