5. INSTALLATION
Unfold Era eScooter1.
2. Stem head assembly
Take out the screws
and wrench.
Assemble the stem
head as the picture
and tighten the
screws. Ensure screws
are tight before each
use to ensure safety.
3. First fasten the bell to the left grip.
Then install the left and right grips
according to the rotations show in
the pictures below.
Ensure handle grips are tight before
each use to ensure safety.
4. Check whether the switch
is working.
Pull up the steering
column
Press the metal
button
Push on the folding
buckle
54
To Next Page
Loading...
