6 Care and Maintenance
6.1
6.1. Lubrication
The fan must be checked at regular
intervals (depending on the operating
conditions).
6.1.1 Drive motor
The motor must be serviced in accordance with the
motor’s lubricating instructions.
6.1.2 Shaft seal
Lubricate the seal once a month.
(use an oil can to pour a small amount of machine
oil in the gap between the seal and shaft).
If a special seal is used, please refer to the
lubrication instructions in the annex.
impeller hub
sealing cord
heat flinger
motor journal
To Next Page
Loading...
