What to do if my Rejuvenation The Falcon will not start?
If your Rejuvenation Fan isn't starting, there are several potential causes to investigate: * Check the main and branch circuit fuses or circuit breakers. * Inspect the line wire connections to the fan and switch wire connections in the switch housings, ensuring that the main power is turned off before doing so. * Replace the remote control battery with a fresh one.
Why is my Rejuvenation The Falcon so noisy?
A noisy Rejuvenation Fan can be caused by several factors: 1. Ensure the blades are properly attached to the fan. 2. Check and tighten any loose screws in the motor housing, being careful not to overtighten them. 3. Make sure the screws securing the fan blade holders to the motor hub are tight. 4. Verify that wire connectors inside the switch housing aren't rattling against each other or the housing's interior wall. Remember to turn off the main power before checking. 5. If you're using a solid-state variable speed control, it may be causing motor noise. Consider using an alternative control method.
How to fix a Rejuvenation The Falcon that wobbles excessively?
Excessive wobbling in a Rejuvenation Fan can often be corrected by addressing these potential issues: * Ensure the setscrew and nut in the downrod support are securely tightened. * Tighten the setscrew in the downrod/hanger ball assembly. * Check that the fan blade holders or blade plate seat firmly and uniformly to the surface of the motor housing. If seated incorrectly, loosen and retighten the screws. * Tighten the hanger bracket screws to the outlet box and ensure the outlet box is securely fastened. * Try interchanging the position of fan blades to redistribute the weight. For example, exchange blades in positions 1 and 3 or 1 and 4. If this does not improve wobble, exchange 2 and 4.
General| Number of Blades | 3 |
|---|---|
| Blade Color | Walnut |
| Blade Material | Wood |
| Voltage | 120V |
| Frequency | 60 Hz |
| Mounting | Ceiling |
Details optimal placement for ceiling fans to maximize airflow and energy savings.
Advises turning off the fan when the room is unoccupied to save energy.
Explains how to use the fan in summer (counter-clockwise) and winter (clockwise) for optimal comfort and energy savings.
Illustrates a low-profile outlet box installation method attached to a joist or block.
Shows a deeper outlet box installation attached to blocking between joists for more space.
Depicts a deep outlet box with a brace spanning between joists for support.
Warns against using full-range dimmer switches, which can damage the fan.
Guides on pairing the remote and using its functions for fan speed and direction.
Explains dip switch settings for light dimming and the fan's safety features like obstruction shutdown.
Recommends regular light dusting and checking screw tightness for fan upkeep.
To Next Page
