Rejuvenation The Petrel

Questions and Answers

C
Charles RhodesAug 4, 2025
Why is my Rejuvenation Fan so noisy?
- R
  Renee BenitezAug 4, 2025
  If your Rejuvenation Fan is making noise, start by ensuring the blades are properly attached. Then, check that all screws in the motor housing and those securing the fan blade holders to the motor hub are snug but not over-tightened. Also, ensure wire connectors in the switch housing aren't rattling against each other or the housing's interior wall. Remember to turn off the main power before checking the wiring. Note that some fan motors don't work well with solid-state variable speed controls, so consider using a different control method. Finally, ensure all screws are tightened securely.
J
Johnny LeAug 13, 2025
How to fix a Rejuvenation The Petrel Fan that will not start?
- L
  Lisa NelsonAug 13, 2025
  If your Rejuvenation Fan isn't starting, first, check the main and branch circuit fuses or circuit breakers. Then, inspect the line wire connections to the fan and the switch wire connections in the switch housings, remembering to turn off the main power. If these steps don't resolve the issue, try replacing the battery with a fresh one.
M
megan73Aug 25, 2025
What to do if my Rejuvenation The Petrel wobbles excessively?
- K
  Kristin PittsAug 25, 2025
  To address excessive wobbling in your Rejuvenation Fan, begin by tightening both setscrews and nuts securely in the downrod support. Next, tighten the setscrew in the downrod/hanger ball assembly and ensure the hanger ball tab is securely in the groove. Check that the screws attaching the fan blade holders to the motor hub are tight and that the fan blade holders seat firmly and uniformly against the motor housing surface; if not, loosen and retighten them. Also, tighten the hanger bracket screws to the outlet box and ensure the outlet box is secure. Finally, try interchanging the positions of the fan blades to redistribute the weight, for example, exchange blades in positions 1 and 3 or 1 and 4. If this does not improve wobble, exchange 2 and 4.