Need help?Do you have a question about the Reliable Controls SS-L and is the answer not in the manual?
General| Brand | Reliable Controls |
|---|---|
| Model | SS-L |
| Category | Accessories |
| Language | English |
Details how to configure the DIP switch for SS addressing.
Explains how to set the SMART-Net address for SS-L models using onboard tools.
Guides on how to locate and open the SMART-Sensor worksheet in RC-Studio.
Shows how SS-L worksheets appear in the System Tree for different controllers.
How to select a specific SMART-Sensor worksheet from the System Tree.
Explains how values are displayed on the SS-L LCD based on worksheet rows.
Lists reserved rows for onboard sensors and I/O options.
Details the function of each column in the SMART-Sensor worksheet.
Explains User Edit and Tag columns, and icon display for state values.
Describes the functions of buttons in the worksheet command bar.
Introduces the setup dialog box for configuring SMART-Sensors.
Explains the various fields within the setup dialog box.
Introduces the -CO2 option, its sensor, and differences from base models.
Step-by-step guide for manual calibration of the CO2 sensor.
Describes the functionality of the occupancy sensor and its protocol.
Lists the onboard configuration tools for SS-L models.
Instructions for using the SS-L Address Tool to set the SMART-Net address.
Explains how the Setup Tool configures MACH-System controllers.
Lists configuration parameters accessible via the MSET Setup Tool.
Step-by-step guide for using the SS-L Setup Tool to configure controllers.
Describes the SS-L Flow Tool for VAV airflow calibration.
Lists configuration parameters for the SS-L Flow Tool.
Step-by-step guide for using the SS-L Flow Tool for airflow calibration.
Example of configuring the address for a SMART-Sensor (SS).
Example of programming reserved points in the SS worksheet.
Referencing host point variables in the SS programming example.
Configuring type and range for points in the SS worksheet.
Configuring User Edit for modifiable points in the SS worksheet.
Referencing points in the SMART-Sensor worksheet.
Configuring units and icons for points in the SS worksheet.
Determining and displaying points on the SS-L LCD.
Table detailing points for an SS-L programming example.
To Next Page
