Quick Tips:
Your remote control has a range of 5 to 10 Meters. If you are out of range the remote will read
“Er.” Please use within rage.
Upon initial installation of your REM Air System; if your remote reads “Er,” and your are within
the allotted rage of 5 to 10 meters, no problem. This simply means the remote needs to be
calibrated with the pump. Its easy:
1.
Disconnect and re-connect your pump to the wall outlet. When the pump’s LED light
shows red, press any button to wake up the remote. Then hold down the “L/R” button
for 3 seconds. Once the LCD screen shows “Su,” you have calibrate successfully.
Your REM air system is now ready for operation.
Batteries:
Remote requires (2) AAA-LR03-1.5V batteries. Remote LCD screen signal when the battery
power is low. Please change batteries in time to avoid any damage.
To Previous Page
Loading...