6
STRAIGHTENING
Select the high heat and high speed setting and roughly dry the hair. When the hair
is nearly dry, attach the concentrator nozzle (which minimises frizz) and reduce the
heat/speed. Section the hair according to thickness and begin with straightening
bottom layers first. Using the a round brush (not included), follow the brush with the
concentrator from above, while slowly gliding down each section of hair from roots
to tips. Once the bottom layers have been straightened, then straighten the mid-
section and complete by straightening the top layers.
NATURAL WAVY TEXTURE
Using the low heat and high speed setting, ‘scrunch’ sections of hair with your
fingers into the palm of your hand while directing airflow through your fingers. For
more volume, lean forward and dry the hair in the upside down position.
STYLING
Set the dryer to the low heat and low speed setting and attach the concentrator
nozzle for precision drying. Section the hair, and style using the round brush.
Concentrate the airflow directly on the hair while styling in the direction you desire. If
necessary, hold the airflow for 2-5 seconds on each section while curling under or over
for additional hold.
USER INSTRUCTIONS
This hair dryer is equipped with a thermostat that will cycle ‘OFF’ if the temperature
exceeds the comfort level due to partially blocked air inlet or air outlet grilles. In the
event that the hair dryer stops during use, turn off all switches and allow the hair
dryer to cool down, at which time the thermostat will automatically reset. Before
using again, check that the air inlet and air outlet grilles are not blocked. Unplug
the hair dryer and clean the openings if necessary. During use, do not block the air
openings or let your hair be drawn into the hair dryer.
MAINTENANCE
Your hair dryer is designed for household use and is virtually maintenance free.
When cleaning becomes necessary, turn all switches off and disconnect the hair
dryer from the power outlet.
To maintain peak product performance, it is important to clean the air inlet grille and
filter at the back of the dryer. To access the air inlet grille and filter, grasp the air
inlet grille retaining ring with your hand and twist it anti-clockwise until it unlocks.
Pull it away from the hair dryer. The filter can now be cleaned with a soft brush or a
vacuum cleaner. Take the air inlet grille retaining ring and position it so the lugs on
the ring are aligned with the notches on the side of the dryer. To lock, turn the air
inlet grille retaining ring clockwise. The exterior of the hair dryer can be cleaned by
wiping it with a damp cloth.
To Next Page
Loading...
