9
Ears: Nose, Ear, Eyebrow Trimmer Head
1. Fit the nose, ear, eyebrow trimmer head onto the groomer handle.
2. When trimming inner ears, avoid inserting the groomer more than
6mm into ear canal.
3. Turn the groomer on.
4. Insert the groomer’s cutting unit gently into the ear canal.
5. Rotate the groomer in a circular motion while gently moving in and out
of ear canal.
Eyebrows: Nose, Ear, Eyebrow Trimmer Head
1. Carefully guide the head to remove any stray or longer hairs from the
eyebrow.
2. For best results, do not use the groomer to define entire eyebrow.
Nose: Nose, Ear, Eyebrow Trimmer Head
1. Turn the groomer on.
2. Carefully insert the groomer’s cutting unit no more than 6mm into
nostril.
3. Rotate the groomer in a circular motion while gently moving in and out
of nose.
CLEANING, CARE & MAINTENANCE
Note: Always clean the groomer heads and attachment immediately after
use to ensure maximum performance and a proper operating life.
Clean Combs and Trimmer Heads With a Soft Brush (not included)
• With the head removed from the handle, gently brush out hair clippings
from the cutting system and top of groomer handle.
Clean Heads With Water
• With the head removed from the handle, rinse ONLY under warm
running water. Do NOT use hot water as this might cause damage.
Note: The groomer handle should not be rinsed.
To Next Page
Loading...
