Remington HC5355 - Hair Texturizing Methods; CARE FOR YOUR HAIRCLIPPER; Cleaning and Maintenance Procedures

7
, HAIR TEXTURE MECHANISM
• Blending dierent length areas. Select the proper length guard to blend.
Slide out the hair texture mechanism (guard) which allows you to blend /
thin out the area.
• Texturedcut–Slideoutthehairtexturemechanism(guard)togiveanall
over textured cut.
, LONG HAIR TEXTURE
• Technique1:twistasmallsectionofhairintoabunch.Slideoutthehair
texture mechanism, with one or two passes in a roll out motion, cut ends of
hair. Be careful not to cut completely through the bunch. When the hair is
 un-twisteditwillhaveaprofessionallookingtexturenish.
• Technique2:usingacomb,brushhairupwardthroughthecombexposing
only the ends of the hair. With the hair texture mechanism in position, cut
just the ends of the hair with one or two passes using a rolling motion. Be
careful not to cut completely through the hair.
C CARE FOR YOUR HAIRCLIPPER
• Yourclipperisttedwithhighqualityblades.
• Toensurelonglastingperformanceofyourclipper,cleanthebladesand
unit regularly.
• Alwayskeeptheattachmentguidecombonthetrimmerblade.
, AFTER EACH USE
• Ensuretheapplianceisswitchedoandunpluggedfromthemainsbefore
cleaning.
• Brushtheaccumulatedhairfromtheblades.Donotsubmergetheclipperin
water.
• Tocleantheunit,wipewithadampclothanddryimmediately.
, Note: Ensure the clipper is turned o when cleaning.
, WASHABLE CLEANING
• TheQUICKWASHSYSTEMisdesignedtomaximisetheeciencyof
washable cleaning.
• Click the buttons that are located on the sides of the hair clipper head. The
blades will slide out and the blade set can easily be cleaned under the tap.
• Once the blades are cleaned the blades are locked into place by pushing the
blade set towards the hair clipper head and will snap into place.
• Do not run the entire unit under the tap, only the blade set is meant to be
submerged in water.