EasyManua.ls Logo

Remington HC7500AU - Product Specifications; Charging and Operation; Charging Indicator Lights

Remington HC7500AU
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
HC7500AU SPECIFICATIONS
Power System Cordless (Rechargeable)
Initial Charge Time 2 Hours
Full Charge Time 2 Hours
Cordless Run Time Up to 60 Minutes
Indicators 4 LEDs
Voltage Type Worldwide 100 - 240V
Waterproof Yes
Replacement Head & Cutters SP-HC7500AU-BA
Power System: Cordless - shaver can only be used when disconnected
from the charging cable. The shaver will not run while it is charging.
CHARGING
Before using, read the important safety instructions in this manual.
1. Ensure the product is switched off.
2. Connect the product to the USB cable and then connect the USB end
of the cable to a powered USB port.
3. Charge for 2 hours when using for the first time. This first charge is
important to the shaver’s battery life.
4. When empty, the battery should be charged for 2 hours for a full
charge and will provide up to 60 minutes of shaving time.
Caution:
Make sure the shaver and your hands are dry when charging the
shaver.
Always charge the shaver in a cool, dry place.
CHARGING INDICATOR LIGHTS
During charging
Lights Charge level
0-25%

25-50%

50-75%

75-99%
= on = flashing

Related product manuals