Preparing for Use
i-Light Unit Diagram Reference (page 3)
Familiarize yourself with the features of your new i-Light device.
Flash Window (fig. 1-D)
The Flash Window is a filtered glass window with built-in UV protection that
allows specific wavelengths of light to pass from the hand piece to your skin
and hair follicles.
WARNING: Always inspect the Flash Window before use to ensure there is no dam-
age to the lens.
WARNING: Always clean the Flash Window before use with the lint-free cloth pro-
vided to ensure there is no oil or debris on the lens.
Skin Contact Sensor
(fig. 1-C)
The Skin Contact Sensor is a safety mechanism that prevents the device
from accidental activation. In order for the device to activate, the Skin
Contact Sensor must be fully depressed against the skin.
A
i-Light Handpiece
B
Flash Button
C
Skin Contact Sensor
D
Flash Window
E
Nose Cone
F
Nose Cone Release Buttons
G
Light Cartridge
H
Handpiece Cord
I
i-Light Base Unit
J
Power Switch
K
Power Inlet
L
Intensity Level Selection Button
M
Intensity Level Selection Display
N
Flash Mode Selection
O
Flash Mode Selection Display
P
Bulb Status Indicator Display
Q
Power Cord
R
Lint Free Cloth
To Next Page
Loading...
