Plugging in the adapter cord will not provide power to the trimmer, but only recharge the batteries.
Quick Release Blades
Quick Release Blades
The blade assembly can be removed to change blades or for easy cleaning.
To remove blade assembly, press the Quick Release Button and pull the blade away from the trimmer body.
To replace the blade, align the guide rails of the blade assembly with the slots on the trimmer body and snap them into place. Make sure the
blade is secure before turning on the trimmer.
Operating Your Trimmer
Trimming Length with Short Length Adjustable Comb
Setting Style Length
1 Stubble 1.5mm 1/16″
2 2.5mm 3/32″
3 Short 4mm 5/32″
4 5.5mm 13/64″
5 Medium 7mm 17/64″
6 9mm 11/32″
7 11mm 27/64″
8 Long 14mm 35/64″
9 18mm 45/64″
Trimming Length with XL Length Adjustable Comb
Setting Length
1 20mm 6/8″
2 21mm 13/16″
3 22mm 7/8″
4 23.5mm 15/16″
5 25.5mm 1″
6 27.5mm 1 1/16″
7 29.5mm 1 3/16″
8 32mm 1 1/4″
9 35mm 1 3/8″
Zoom Wheel and Removable Adjustable Combs
NOTE: The Adjustable Combs must be attached to the trimmer in order to use the Zoom Wheel.
To adjust, roll the Zoom Wheel toward the top of the trimmer for a longer length, and toward the bottom of the trimmer for a shorter length.
The wheel will click into one of nine positions.
Begin trimming at one of the longest settings 8 or 9 to avoid accidentally trimming hair too short. As you become familiar with the settings,
you can then select your desired length setting.
Remove Adjustable Combs if you are: defining hairline edges such as sideburns, trimming the nape of your neck, trimming your beard line on
the front of the neck, or if you want to clean cutter assembly.
To remove the comb, with the adjustable zoom wheelset to 1, pull the comb off the beard trimmer.
NOTE: The Adjustable Combs can only be placed on the trimmer one way; if a comb does not fit properly, remove and reverse it.
How to Use
Creating the “Stubble Look”
For a precision stubble look, attach the stubble blade and the adjustable stubble comb which can trim the hair between 1 to 5mm.
Please note that the adjustable zoom wheel does not increase the length settings on the stubble comb. To adjust this length settings, turn
the dial found on the back of the stubble comb which will then indicate the different trimming lengths to choose from.
To Thin And Taper The Beard/ Moustache
Turn the unit on.
Make sure the short-length adjustable comb and beard blade are on. Place the flat top of the short-length adjustable comb against the skin.
Slowly slide the trimmer through the hair. Repeat from different directions as necessary.
If hair builds up in the trimmer comb during the trimming process, switch the unit off, pull off the comb and brush off.
Detailing
To create sharp lines around your beard, remove the adjustable comb from the trimmer, then press the popup trimmer release button.
To Next Page
Loading...
