6
, BLADE RELEASE
• Make sure the product is turned o.
• Remove the adjustable comb.
• Remove the blades by pushing your thumb upwards under the blades and
move the blade set away from the trimmer body.
• To reattach the blades, align the back of the blades with the back housing at
the top of the trimmer and push down until the blade set clicks into place.
E TIPS FOR BEST RESULTS
• Beard, moustache and sideburn hairs should be dry.
• Avoid using lotions before use.
• Comb your hair in the direction that it grows.
C CARE FOR YOUR TRIMMER
• To ensure long lasting performance of the trimmer, clean the blades and unit
regularly.
• Ensure the product is switched o.
• Do not use harsh or corrosive cleaners on the units or their cutters.
• This product has washable blades. Ensure the blades are detached from the
trimmer before washing the blades. Wash the blades under a running tap to
remove any hair clippings.
• After rinsing under a tap ensure the blades are dry.
• Please note, the main body of the trimmer is not washable and should be
kept away from water.
• After each use it is recommended to clean hair from the blades either by
rinsing the blades or using the cleaning brush.
E TROUBLESHOOTING
• The trimmer does not work when turned on:
• Ensure the batteries are properly inserted.
• Trimmer blades do not move:
• The cutting unit may be dirty and clogged.
• Clean and lubricate the unit.
ENGLISH
To Next Page
Loading...
