EasyManua.ls Logo

Remington STYLING PRO 2150 - User Instructions and Maintenance; Thermostat Operation; Cleaning the Air Inlet and Filter; Proper Storage Guidelines

Remington STYLING PRO 2150
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
WARNING: Do not use this appliance near bathtubs, showers, basins
or other vessels containing water.
As with all electrical appliances, the power cord must be regularly
checked for wear and tear. Immediately cease using this product if
the power cord shows any signs of damage.
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
USER INSTRUCTIONS
This hair dryer is equipped with a thermostat that will cycle `OFF’ if the temperature
exceeds the comfort level due to partially blocked air inlet or air outlet grilles. In the
event that the hair dryer stops during use, turn off all switches and allow the hair
dryer to cool down, at which time the thermostat will automatically reset. Before
using again, check that the air inlet and air outlet grilles are not blocked. Unplug
the hair dryer and clean the openings if necessary. During use, do not block the air
openings or let your hair be drawn into the hair dryer.
MAINTENANCE
Your hair dryer is designed for household use and is virtually maintenance free.
When cleaning becomes necessary, turn all switches off and disconnect the hair
dryer from the power outlet.
To maintain peak product performance, it is important to clean the air inlet grille and
filter at the back of the dryer. To access the air inlet grille and filter, grasp the air
inlet grille retaining ring with your hand and twist it anti-clockwise until it unlocks.
Pull it away from the hair dryer. The filter can now be cleaned with a soft brush or a
vacuum cleaner. Take the air inlet grille retaining ring and position it so the lugs on
the ring are aligned with the notches on the side of the dryer. To lock, turn the air
inlet grille retaining ring clockwise. The exterior of the hair dryer can be cleaned by
wiping it with a damp cloth.
STORAGE
When not in use, unplug the unit. Allow the appliance to cool and store out of reach
of children in a safe, dry location. Never wrap the cord around the appliance as this
will cause the cord to wear prematurely and break. Handle the cord carefully for long
life and avoid jerking, twisting or straining especially at plug connections. If the cord
becomes twisted in use, periodically straighten it.
You may also use the hang loop to store the hair dryer within convenient reach,
ensuring that water cannot be splashed on to it when it is hung up.

Related product manuals