Rev. 02 – July 16
th
, 2009
8 Aircraft Ground Handling and Servicing
Aircraft Ground Handling and Servicing 8 - 8
8.12 Airframe Servicing
The body design of the REMOS GX consists of carbon fiber
materials, which ensures extreme strength and a long lifetime of the
whole aircraft. Maintenance is reduced to checks of the moving parts
such as: locks, hinges and connections.
Prior to each flight a visual check of the whole surface for cracks,
dents or other damages should be conducted. Damage to the
airframe (composite bodywork) must be repaired by skilled and
authorized persons only.
Repairs and services may only be conducted using REMOS
genuine replacement parts. The use of parts or materials not
certified by REMOS aircraft is not permissible! Furtheron the
use of uncertifed parts will lead to loss of warranty and
manufacturers liability.
Remark:
For operating and servicing of the aircraft please refer
also to the servicing and operating instructions of the
related manufacturers (i.e. engine, propeller, avionics,
rescue system, tow release clutch, brakes).
Take care to get the latest information issued, in doubt
ask your local REMOS dealer for further advice.
To Next Page
Loading...
