8
E N G L I S H
Double connection - and disconnection function
Allows you to turn a second device on or off at the same time as
the device the remote control is currently activated on.
Programme double connect-/disconnection function:
1. Press the button for the device that will be used with the
remote control, e.g. [TV].
2. Press and hold
at the same time as you press the
button for the second device that shall turn on/off right after
the rst device (the one that was chosen in step 1), e.g.
[SAT].
3. Release
. The LED blinks once when the function has
been activated.
Deactivate double connect-/disconnection function:
1. Press the button for the device which the remote control is
being used with, e.g.
[TV].
2. Press and hold
at the same time as you press the button
for the second device which was programmed to turn on/off
at the same time, e.g. [SAT].
3. Release
. The LED ashes twice when the function has
been deactivated.
Secondary function
The buttons that have a secondary function are marked with
a grey symbol above respective button. To use a secondary
function, you press the [ SHIFT ] button and then on
corresponding function button.
Care and maintenance
■ Do not expose the remote control for dust, strong sunlight,
humidity, shocks or high temperatures.
■ Never mix new and old batteries. The old ones may start to
leak and destroy the device.
■ Never use corroding or polishing solvents on the remote
control.
■ Do not take apart the remote control. It does not contain
any components that can be adjusted by the user.
To Next Page
Loading...