Remotec ZXT-600 - IR Code Learning Steps; Start IR Learning Action; Aim Remote and Transmit IR Code; Interpret Learning Status Indicators

Remark:
Once you finished the IR Code Learning, please go to Config IR code operation and config the IR code
number to “000” to select the dedicated AC code number “000” for learning.
• Click “Learn” icon to start IR
learning action.
Then Green Indicator still turns ON for
indicating the IR Code Learning Start
• Aim the Original Air Conditioner
Remote at AC Master according to
below position within 1-3cm Press
“Power ON“ button on the Original
Air Conditioner Remote. If the
Learning is failed, repeat previous
step to learn next IR code.
Successful:
Green Indicator flashes TWICE
Unsuccessful:
Red Indicator flashes TWICE.