To Next PageTo Next Page
Need help?Do you have a question about the REMS Mini-Press 22V ACC and is the answer not in the manual?
General| Power Supply | Battery |
|---|---|
| Max Pressure | 22 kN |
| Battery Type | Li-Ion |
| Crimping Force | 22 kN |
| Model | Mini-Press 22V ACC |
| Category | Power Tool |
Guidelines for maintaining a safe and well-lit work environment to prevent accidents.
Precautions to prevent electric shock, including proper plug usage and avoiding wet conditions.
Advice on staying alert, using personal protective equipment, and maintaining balance.
Instructions on proper usage, maintenance, and handling of power tools.
Guidelines for safe charging, handling, and storage of battery packs.
Recommendations for servicing power tools by qualified personnel.
Specifies the intended applications for REMS radial presses, cropping tongs, cable shears, axial presses, and pipe expanders.
Lists the components included with electrical radial presses and pipe expanders.
Provides part numbers for various REMS drive units, batteries, and accessories.
Details the pipe diameter ranges for different REMS pressing and expanding tools.
Specifies the nominal thrust forces for various REMS radial and axial presses.
Provides electrical specifications for REMS power tools and batteries.
Lists the physical dimensions for various REMS drive units and accessories.
Details the weights of REMS drive units, batteries, and accessories.
Presents noise emission values (LPA, LWA) for different REMS power tools.
Provides weighted effective vibration values for REMS power tools.
Ensuring correct mains voltage and using RCD protection for electrical connections.
Information on handling, charging, and preventing damage to rechargeable batteries.
Covers installation, working procedures, safety, and checks for radial press operation.
Details on installing and operating axial presses, including different press head types.
Instructions for installing and operating various REMS pipe expanders.
Explains the battery charge indicator LED and discharge protection for cordless presses.
Describes the LED indicator for checking the charging level of Li-Ion 21.6V batteries.
Guidance on performing inspections and repairs on REMS drive units and tools.
Instructions for cleaning and maintaining pressing tongs, expanders, and other accessories.
Diagnosing and resolving issues related to the drive unit not functioning.
Troubleshooting common faults with radial presses, such as incomplete pressing.
Addresses the issue of a prominent burr on press fittings during closing operations.
Resolving problems like pressing jaws closing without load or offset.
Diagnosing and fixing pipe crushing issues during axial pressing operations.
Troubleshooting a prominent gap between the press fitting and collar after axial pressing.
Resolving problems where expanders or expanding heads do not function correctly.
