1.91
ENG_UD59754_1
Essuie-vitre, lave-vitre avant (FKJK - Renault)
Specific front wiper position
(service position)
This position enables the blades to be
lifted to remove them from the winds-
creen.
It may be useful to:
– to clean the blades;
– to release the blades from the winds-
creen in winter;
– replace the blades ➥ 5.35.
With the ignition off, set the stalk 1 to
position E (fast wiping speed function).
The blades stop slightly away from the
bonnet.
To return the blades to their lowered po-
sition, with the ignition off, ensure that
the wipers have folded down onto the
windscreen, then set the stalk 1 to posi-
tion B (off).
Before switching on the ignition,
place the wipers on the windscreen.
Otherwise, there may a risk of damage
to the bonnet or the wipers when they
are switched on.
Before any action involving
the windscreen (washing
the vehicle, de-icing, clean-
ing the windscreen, etc.)
return stalk 1 to position B (stop).
Risk of injury and/or damage.
In the event of obstacles on the
windscreen (dirt, snow, ice etc.),
clean the windscreen (including the
central area located behind the inte-
rior rear view mirror) before starting
the wipers (risk of motor overheat-
ing).
If an object is preventing a blade
from moving, it may stop functio-
ning. Remove the obstacle and
reactivate the wiper using the wiper
stalk.
WINDSCREEN WASH, WIPE (4/5)
1
A
B
C
D
E
To Next Page
Loading...
