partition ......................................................
(up to the end of the DU)
1.19
ENG_UD70799_3
Cloison de séparation pivotante (XJK - Renault)
To put the partition back into its initial
position, perform the same procedure
in reverse. Make sure that the catch is
properly locked 1 and place the seat in
the comfort position.
Remember to reactivate the front pas-
senger airbag before a passenger oc-
cupies the seat ➥ 1.52.
Note: before returning the swivelling
section to its initial position, check that
the locking point 2 is clean.
To rotate the partition
– Deactivate the front passenger
airbag ➥ 1.52;
– fold down the seat ➥ 1.17;
– make sure the seat is correctly
locked in position;
– unlock the swivelling section of the
partition by lifting the catch 1;
– pivot the moving section 90 de-
grees, lock it at point 3 and lower the
catch 1;
– the catch 4 should stay in the locked
position.
Swivelling partition
Once the removable par-
tition has been han-
dled, please ensure that
catches 1 and 4 are prop-
erly locked.
Risk of injury.
SWIVELLING PARTITION
When moving the swivelling parti-
tion, ensure the seat belt is not dam-
aged. Hold it aside when you rotate
the partition.
3
4
1
1
2
When the front seatback
is in the table position or
folded down, depending on
the vehicle, you must de-
activate the front passenger airbag
➥ 1.52.
Risk of serious injury caused by
items resting on the seatback table
which may be dislodged when the
airbagairbag is deployed.
To Next Page
Loading...
