2.23
ENG_UD68275_2
Rear view assist (XJK - Renault)
Operation
The camera’s field of vision does not
cover the entire area behind the vehi-
cle, particularly the blind spot area A.
On vehicles equipped with the Stop
and Start function, the display remains
active when the engine is in standby.
➥ 2.5.
Switching off the function
The display switches of:
– immediately when engaging reverse
gear;
– 30 seconds after the ignition is
switched off.
REAR CAMERA (2/3)
Objects which appear on the edge
of screen 2 may be deformed.
In very bright light (snow, vehicle
in sunshine, etc.), the camera view
may be partially disturbed.
In low brightness or poor weather,
the image on the screen may be dis-
torted.
A
2
To Next Page
Loading...
