1.38
ENG_UD68265_2
Sécurité enfants : choix de la fixation siège enfant (XJK - Renault)
Attachment using the ISOFIX
system
Authorised ISOFIX child seats are ap-
proved in accordance with current reg-
ulations if any of the three cases below
applies:
– universal ISOFIX 3-point for-
ward-facing seat;
– semi-universal ISOFIX 2-point seat;
– specific.
For the latter two, check that your child
seat can be installed by consulting the
list of compatible vehicles.
The two rings 1 ISOFIX are located be-
tween the seatback and the seat base
and are identified by a marking ü.
CHILD SAFETY: choosing a child seat mounting (2/3)
1
Check that the seatback
of the forward-facing child
seat is in contact with the
back of the vehicle seat.
In this case, the child seat may not
always rest on the base of the vehi-
cle seat.
Before using an ISOFIX
child seat that you pur-
chased for another vehicle,
check that its installation is
authorised. Consult the list of ve-
hicles which can be fitted with the
seat with the equipment manufac-
turer.
Attach the child seat with the ISOFIX
locks, if these are provided. The ISOFIX
system allows quick, easy and safe fit-
ting.
The ISOFIX system consists of 2 rings
and, in some cases, a third ring.
No modifications may be
made to the component
parts of the restraint system
(seat belts, ISOFIX, seats
and their mountings) originally fitted.
To Next Page
Loading...
