3.10
Activating the function
– With the ignition switched on and the
air-conditioning operating (please
refer to the information on “Automatic
air-conditioning” in Section 3);
– press button 2
until the
or
symbol is displayed on dis-
play 1;
– switch off the ignition;
– put your vehicle on charge.
The function is triggered one hour prior
to the programmed time to reach a
comfortable temperature.
Automatically switching off the
function
– about 30 minutes after the pro-
grammed time;
– if the charging socket is discon-
nected;
– if the
or no longer appear
on display 1 when you press button 2
.
AIR CONDITIONING: programming (2/2)
– hold down button A or B - the hours
flash;
– press buttons A and B to set the
hour;
– hold down button A or B to confirm
the hour setting;
– the minutes flash - press buttons A
and B to set the minutes;
– hold down button A or B to confirm
the minutes setting. Your settings are
now saved.
3
4
B
Programming the function start time
Two different times can be pro-
grammed.
– to programme the start tie, hold
down button A or B on stalk 4 until
the message “Settings menu” ap-
pears on display 3;
– scroll down the menu using but-
tons A and B until the
or
symbol appears;
A
The two programmed times cannot
be activated simultaneously.
To Next Page
Loading...
