4.4
Replacement intervals
Refer to the Maintenance Document for
your vehicle.
LEVELS (1/2)
Coolant
The level is checked with the engine
switched off and on flat ground. The
level when cold must be between the
“MIN” and “MAX” marks on coolant res-
ervoirs 1 and 2.
Top this level up when cold before the
“MINIMUM” mark is reached.
Checking intervals
Check the coolant level regularly
(very severe damage is likely to be
caused to the engine if it runs out of
coolant).
If the level needs to be topped up, only
use products approved by our Technical
Department which ensure:
– protection against freezing;
– anticorrosion protection of the cool-
ing system.
No operations should be
carried out on the cooling
circuit when the engine is
hot.
Risk of burns.
Consult your approved dealer at
once if you notice an abnormal or
repeated drop in any of the fluid
levels.
1
2
Do not do any work under
the bonnet when the vehicle
is charging or when the igni-
tion is switched on.
To Next Page
Loading...
