5.14
FRONT HEADLIGHTS: changing bulbs (1/2)
Direction indicators
Remove cover B, unscrew bulb
holder 2 a quarter of a turn and un-
screw the bulb a quarter of a turn.
Bulb type: PY21W.
The bulbs detailed below can be re-
placed. However, we recommend that
these be replaced by an approved
dealer if this proves difficult. After open-
ing the bonnet, unscrew the screws 1
using standard tools or, depending on
the vehicle, using the spanners pro-
vided in the tool kit.
Pull the headlight as far as possible in
the direction shown by the arrow.
Note: the headlight cannot be pulled
out completely. Avoid pulling too hard,
as this could damage the connections.
B C D 2 43
1
Obtain an emergency kit containing
a set of spare bulbs and fuses from
an approved Dealer.
Do not do any work under
the bonnet when the vehicle
is charging or when the igni-
tion is switched on.
To Next Page
Loading...
