Turn the ring to:
u
switch on the side lights;
k
switch on the dipped beam headlights;
: pull the stalk towards you;
: ring in position
k
,
pull the stalk beyond the point of resistance;
: activate the automatic headlights (depend-
ing on the vehicle).
Turn ring upwards and then release it to:
g
switch on the front fog lights.
Turn ring downwards and then release it to:
f
switch on the rear fog light.
To switch them off, repeat the operation.
Stalk in position:
– : park;
– : intermittent wiping or, depending on the
vehicle, automatic wiping;
ring can be used to adjust the sensitiv-
ity of automatic wiping, from minimum sensitiv-
ity () to maximum sensitivity ().
– : normal wiping speed;
– : fast wiping speed or maintenance position
(engine switched off).
pull stalk .
To Next Page
Loading...
