With the hands-free RENAULT card in the interior
detection zone (except for some high areas such as
the sun visor...), press button .
With key in the ignition switch, turn it fully on.
Once the engine has started, release it.
: before starting, position the gear
lever in neutral.
: before starting, position the
gear lever in position .
With the vehicle stationary, press button .
With the vehicle stopped, turn the key towards you.
Depending on the vehicle, certain functions can
be adjusted from the trip computer and warning
system.
To access this menu, with the vehicle stopped:
– briefly press button or repeatedly until the
message “settings menu: long press” appears;
– hold down button or until the message “set-
tings menu” appears;
– press button or until you have the function
you wish to modify;
– select the line, hold down button or to modify
the function.
To exit the menu:
– press once or more to select “Back” or “Exit”;
– press and hold to confirm;
– repeat the operation if necessary.
To Next Page
Loading...
Need help?
General
