In order to use a Bluetooth® device, either a tel-
ephone or portable audio player (depending on
the vehicle), from your multimedia system, please
follow the instructions below.
Pairing will enable the multimedia system to rec-
ognise and store your Bluetooth® device. This is
the first step to carry out in order to use your tel-
ephone or portable audio player.
you can pair several devices to your multi-
media system, but only one device can be used
at a time (a single telephone or a single portable
audio player).
Pairing is carried out directly on your device (refer
to its user instructions):
– check that your multimedia system and your
Bluetooth® device are on;
– activate the Bluetooth® connection on your
device;
– in the multimedia system settings menu, select
the field which allows you to store or pair a
Bluetooth® device;
– launch a search for Bluetooth® equipment from
your device;
– select “My-Radiosat” or “MY-CAR” from the list
of devices found;
– enter the pairing code using your device’s keypad
(it will appear on the multimedia system screen,
otherwise refer to the user instructions for the
system).
The device is paired.
Your Bluetooth® device must be connected to the
multimedia system for all its functions to be ac-
cessible.
To connect your device, select it from the list of de-
vices stored in the multimedia system.
The multimedia system may also automatically rec-
ognise your device once it is switched on.
With your Bluetooth® device connected, you can
use some functions directly via the controls on
your audio system.
You can also:
– for a portable audio system: select a music track
or an album…;
– for a telephone: display the telephone address
book, call a contact from the telephone address
book, update the telephone address book…
To Next Page
Loading...
