tailgate .......................................................
(up to the end of the DU)
mobile floor ................................................
(current page)
3.36
ENG_UD57636_3
Aménagements coffre à bagages (HFE - Renault)
Storage position
This allows for more space to store
things in the boot.
– Remove part B then part A of the
mobile floor1;
– place part A in the luggage com-
partment under the supports 3 then
part B.
Luggage compartment storage
BOOT FITTINGS (1/2)
A
Mobile floor 1
(depending on the vehicle)
It is made up of two independent and
interchangeable parts, A and B. The
smooth side is easy to clean.
Flat position
It allows you to have a flat floor by fold-
ing down the back of the rear bench
seat.
The mobile floor is positioned on sup-
ports 3.
Maximum load allowed on the
mobile floor when flat: 50 kg evenly
distributed.
Intermediate position
This enables you to compartmentalise
the boot into two separate spaces.
– Remove the part B of the mobile
floor;
– place it in the boot using the runners
provided 2.
1
1
B
1 2
3
To Next Page
Loading...
