lighting:
exterior .................................................
(up to the end of the DU)
lights:
side lights .............................................
(current page)
signals and lights .......................................
(up to the end of the DU)
lighting:
instrument panel ..................................
(current page)
lights:
main beam headlights ..........................
(current page)
lights:
dipped beam headlights .......................
(current page)
1.82
ENG_UD64200_2
Éclairages et signalisations extérieures (HFE - Renault)
Exterior lighting and signals
á
Main beam headlights
With the dipped beam
headlights lit, push stalk 1. This indica-
tor light on the instrument panel comes
on.
To return to the dipped headlight posi-
tion, pull the stalk 1 towards you again.
EXTERIOR LIGHTING AND SIGNALS (1/6)
š
Side lights
Turn ring 3 until the symbol is
opposite mark 2. This indicator light on
the instrument panel comes on.
k
Dipped beam
headlights
Manual operation
Turn ring 3 until the symbol is opposite
mark 2. This indicator light on the in-
strument panel comes on.
Automatic operation
Turn the ring 3 until the AUTO symbol
is opposite the mark 2: with the engine
running, the dipped beam headlights
switch on or off automatically depend-
ing on the brightness of the light out-
side, without any action on stalk 1.
Before driving at night:
check that the electrical
equipment is operating cor-
rectly. As a general precau-
tion, check that the lights are not
obscured (by dirt, mud, snow or ob-
jects being transported).
1
3
2
When driving on the left in a left-
hand drive vehicle (or vice versa),
drivers must readjust their lights
throughout their stay (see “Adjusting
headlight beams” in Section 1).
1
To Next Page
Loading...
